How it works
A SolarGaps blind, part by part. Select a number on the model or a part in the list.
See the frame and blade backs in 21 colours →
-
- SunPower C60 monocrystalline back-contact cells.
- 22.4% efficiency, according to SolarGaps.
- The contacts are at the back, so there are no lines on the front.
- Up to 100 W per m² of blind in full sun, according to SolarGaps.
-
- A self-cleaning ETFE coating, according to SolarGaps.
- Rain and snowmelt wash off most of the dirt, according to SolarGaps.
- SolarGaps gives it a service life of more than 30 years.
-
- Made of Swiss aluminium.
- A C-shaped profile: its curved edges hold the solar panel, according to the patent.
- The panel is made of sections on an insulating base, under a protective layer, according to the patent.
-
- The cell sections in each panel are joined by waterproof plug-in connectors, and each panel is coupled to a shared bus, according to the patent.
- A DC/DC converter or a Schottky diode sits in one edge section, according to the patent.
- This view is an illustration based on patent US 11,905,757 B2, Fig. 6. The real cable routing is not published and is to be confirmed by SolarGaps.
-
- A certified micro-inverter converts direct current to alternating current for the building.
- 95% average efficiency, according to SolarGaps.
- It can also feed battery storage.
- This view is an illustration based on patent US 11,905,757 B2, Fig. 6. The real cable routing is not published and is to be confirmed by SolarGaps.
-
- Houses a Somfy motor and SolarGaps’ own electronic management device, which sends data to the cloud and the app.
- The blind retracts fully into it.
- In snow, the blind must be fully retracted, according to SolarGaps’ FAQ.
- The parts inside are drawn as an illustration: SolarGaps has not published the inside of the headbox.
-
- A steel cable or rigid guides.
- Described as wind resistant and tested with an air gun.
- Wind load resistance Class 2 under EN 13561, according to SolarGaps’ own declaration.
-
- App, Amazon Alexa, Google Assistant, EnOcean switch, Somfy RTS remote, wired wall switch or manual winding crank.
- An automatic mode can follow the sun.
- According to SolarGaps, most customers keep a fixed angle.
-
- The blind sits outside the glass.
- It stops the sun’s heat there, before it enters the building.
Dimensions and how sure we are
The model: 1200 × 1600 mm, 15 lamellas fixed at 45°, anthracite.
| Lamella pitch | 95 mm measured |
| Cell length along the lamella (SunPower C60 edge) | 125 mm measured |
| Headbox height | 105 mm measured |
| Guide width | 27 mm measured |
| Lamella width | 100 mm estimated |
| Cell size across the lamella | 83 mm estimated |
| Headbox depth | 155 mm estimated |
| Sheet thickness, layer thicknesses, RAL code | assumed |
Measured values are scaled from SolarGaps’ own photos and videos, using the brick courses behind an installation as a ruler (62.5 mm, Dutch Waalformaat; the brick type is inferred). The lamella shape follows patent US 11,905,757 B2, Fig. 5. Back-contact SunPower C60 cells show no lines on the front. To be confirmed by SolarGaps: lamella width and how the cells are cut (100 mm with 125 × 83 mm cells, as modelled, or 80 mm with half cells).
3D model built from the patent drawings and SolarGaps’ photos; lamella width and how the cells are cut are still to be confirmed by SolarGaps.
* Shape, size or position assumed.
Patent: US 11,905,757 B2. “According to SolarGaps” marks the company’s own figures.
Website by Inédito